![]() ![]() Third: Carefully pry out the insert that is located at the door handle. Re-installing you will need to align the slot for the rod in the lock or unlock position depending on the rod position. The lock insert has no mechanical connection but simply is used to slide the lock rod. Again a straight screw driver and care should not leave any scars. There are no significant tabs to worry about here. Second: Carefully pry out the door lock insert. Once these two clips are disengaged the triangle should pull straight up and be free. I pulled the top of the triangle out by hand then could see the clips and used a straight screw driver to carefully pry from under the triangle panel so as not to scar the visible part after re-assembly. Do not pry at the bottom as there are two tabs that slide in to keep the module in place. This is held in with two metal clips about half way down the panel. THE COUTESY LAMP IS HOT DUE TO THE DOOR BEING OPEN WHILE THIS PROCEDURE IS DONE!!!!įirst: Remove the triangle panel at the top of the door (behind the mirror). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |